ESC DJ
Two decks, real beat analysis and sync, scratching, loops, hot cues, a sampler and a recorder. Your tracks are analyzed and kept in your browser - nothing is uploaded.
| # | Art | Preview | Title | Artist | BPM | Energy | Key | Time | Rating | Date added |
|---|
Keyboard shortcuts
| Space | Play / pause the focused deck | F | Switch the focused deck |
| Q / W / E | Deck A: play, cue, sync | I / O / P | Deck B: sync, play, cue |
| 1 - 8 | Hot cues on the focused deck | Left / Right | Crossfader (Shift = bigger step) |
| Up / Down | Pitch bend the focused deck (hold) | M | Mark a chapter while recording |
| ? | Show or hide this list | Esc | Close this list (never stops the music) |
| C | Fold every setup section away (decks and mixer stay) |
The focused deck is the one you last touched - its panel is underlined. Space never re-triggers a button you just clicked.
ESC DJ - Tutorial and Help
Tutorial - your first mix
1. Load the practice tracks. Open the Library tab at the bottom of the console and click Load demo tracks - two short loops arrive analyzed and ready.
2. Put one on each deck: in the library rows, click Deck A on the first track and Deck B on the second.
3. Press Play on deck A - the big gold button under the jog wheel - and let it run.
4. Set a hot cue: while it plays, click an empty cue pad at a moment you like. Clicking that pad again jumps straight back to it.
5. Start deck B and press its Sync button - it matches deck A's tempo and lines the bars up.
6. Blend: slide the crossfader in the middle of the mixer slowly toward the centre. Trade the bass with the Low knobs on the channel strips, and sweep the A FILTER and B FILTER knobs in the Colour row above the crossfader.
The guided tour runs these same steps with each control lit up as you reach it:
Your first recording: in the Master strip's Record row, pick WebM or WAV and click Record mix. Every track you load adds a chapter by itself - press M to mark your own - and Stop hands you the mix plus a tracklist with the chapter times.
Your first stem mix: load a track, open that deck's stem strip above the console and click Separate loaded track. Mute the Vocals slot to ride the instrumental, solo Drums for a break; Clear stems brings the original file back.
1. Getting started
ESC DJ runs entirely in your browser - your music never leaves this device. Add tracks with Add files, or click Load demo tracks to try the two built-in practice tracks. Tracks are analyzed as they arrive (tempo, beat grid, key, loudness) and kept in the browser library, so they are still here next visit. Load a track onto a deck from its library row, press Play, and mix with the channel faders and the crossfader. Trim and the three EQ bands on each channel are rotary knobs: drag up or down to turn one (hold Shift for fine adjustments), scroll on a knob, double-click to reset it, or focus it and use the arrow keys. On desktop the console fits one screen: the Fit button in the master strip scales everything toward your window - it stops at a readable size and the app scrolls inside itself rather than shrinking further, and the library keeps its own scrollbar. Turn Fit off for full-size controls with normal page scrolling.
If you close the tab mid-set, reopening ESC DJ offers a Restore button that rebuilds both decks, the mixer and your positions, paused - it never starts playing on its own.
2. Decks and transport
Each deck has a jog wheel (drag the top plate to scratch, drag the rim to nudge), Play and Cue in CDJ style, a tempo slider with a range selector (plus minus 8 up to WIDE), pitch bend buttons, a vinyl brake, and reverse. Key lock (Master tempo) holds the pitch while the tempo moves; key shift moves the pitch in semitones and Key sync matches the other deck's key. The big waveform lane shows the whole track; the strip under it is a zoomed view around the playhead. Clicking the lane seeks.
3. Beat grid, cues and loops
The grid is detected at import. If a track sits slightly off, use the grid tools on the deck: nudge by 1 or 10 milliseconds, halve or double the BPM, or tap tempo. Hot cues A to H live on the performance pads - click an empty pad to set one, click a set pad to jump, right-click to clear. Memory cues are a separate list you can name; click a memory cue's time to jump to it. Loops: set In and Out points, or grab a bar loop of any length; reloop returns to the saved loop, and the halve/double buttons resize it. With Quantize on, cues and loop points snap to the grid. Loop rolls live in their own pad mode: hold a pad for a rolling loop of that length, release to slip back.
4. Sync and phrases
Sync matches the other deck's tempo and aligns the bars. The half and double buttons sync at half or double rate for tracks detected at the wrong octave. Phrase mode goes further: the lanes are painted with the track's sections (Intro, Build, Drop, Breakdown, Outro, worked out from the energy shape at analysis), and with Phrase on, Sync also lines up phrase starts so drops land together. The bars readout in the lane head counts down and names the section you are in.
5. Effects
FX1 and FX2 are per-deck beat effects with twelve sounds: Echo, Reverb, Flanger, Dub echo, Pitch echo, Crush, Gate, Phaser, Tremolo, Noise and Wash. Level rides the wet amount (on Noise it is the sweep itself; on Wash it opens the filter), and Beats sets the echo length or the gate's chop rate against the deck's tempo. FX3 is a master rack (Echo, Reverb, Flanger) over the whole mix. Pad FX mode puts eight effects on the performance pads - hold to apply, release and the tail rings out. The colour FX knobs are the per-channel filters: sweep left for low-pass, right for high-pass.
6. Sampler
Eight sampler pads sit under the decks. Click an empty pad to load a one-shot file; click a loaded pad to fire it; right-click clears it. A pad can loop, and Capture A loop / Capture B loop slice the deck's active loop straight into the next free pad, tempo-matched to the deck.
7. Library and crates
The library rests as a tab at the bottom of the console - click it to open the library as a dock, click it again to collapse it back to the tab. The library table shows artwork, a mini waveform, key, rating and date for every track. Rows tint orange or blue when a track is on Deck A or B, and a coloured edge marks keys that mix harmonically with what is playing. Search filters by title and artist; the filter buttons narrow to a deck or to key-compatible tracks. Crates are your own named lists: create one with New crate, add tracks from the Crate menu on any row, and pick the crate in the filter row to see only its tracks. Export rekordbox XML writes the whole library - cues, loops, grids, keys and crates - in rekordbox's format for CDJ prep; the file locations inside it are placeholders, because your audio lives in this browser, so rekordbox will ask you to re-link the files.
8. Recording your set
Record captures the post-limiter master mix as WebM or WAV. Stream sends the broadcast mix (the same feed Mix Rooms hosts send, through the broadcast delay) live to a public listen link - press Go live in the Stream row, share the link, and anyone can listen in a browser. Recording and streaming can run at the same time. While recording, every track you load writes a chapter automatically, and the Mark chapter button (or the M key) adds your own. Stop and you get the mix plus a Tracklist text file with the chapter times. Auto-DJ can run the library hands-free with a crossfade length you set in seconds.
9. Mix Rooms and broadcast delay
A Mix Room lets other people hear your mix live. Type a room code and your name, then Host my mix; listeners open ESC DJ, type the same code and Join and listen. Anyone with the code can join, so treat it like a shared key. The broadcast delay holds the listeners' feed back by 3 or 7 seconds - your own sound and your recordings are never delayed. If something goes out that should not, hit Dump delay: the buffered seconds are dropped and never air, and the listeners hear silence while the delay refills with clean audio.
10. Stem decks
Each deck has a stem strip with four slots: Drums, Bass, Vocals and Other. Separate loaded track splits the deck's track with the same Spleeter engine as the Stems app and fills the slots; you can also load stem files (for example WAVs exported from the Stems app) into slots directly. When a deck has stems, its Play runs the four slots in sync instead of the single file, and each slot can be muted or soloed live. In stem mode the jog scratch, key lock and key shift are off - the tempo slider, cues, loops and effects still work. Clear stems returns the deck to the original file.
11. Keyboard and MIDI
Press ? or the Keys button for the full shortcut list. Highlights: Space plays the focused deck, 1 to 8 fire its hot cues, the arrow keys move the crossfader and bend pitch, F switches the focused deck. A standard MIDI map is included for common controllers (transport, hot cues, crossfader, channel and master levels), and Learn mode in the MIDI panel lets you bind any control by touching it.
12. Four decks
The Decks 2/4 toggle in the master strip adds decks C and D as compact lanes with their own transport, tempo and channel strips (desktop widths only). C rides the left side of the crossfader with A; D rides the right side with B. Load them from the library rows like the main decks.
13. Master sound and audio quality
The Audio row in the master strip holds the readouts (output latency, limiter gain reduction, the dropout counter fed by the audio thread, and a frame budget meter that warns when the page is struggling) plus Auto-Start (the other deck starts when a track ends) and Stop all (a one-second fade-out of everything). Auto-gain can level tracks by peak/RMS or to the -14 LUFS streaming target; the channel strips show momentary LUFS under each meter. Stretch quality High uses longer grains for cleaner key-locked stretches on melodic tracks, and below plus or minus 2 percent pitch the stretch steps aside for plain resampling. The buffer size choice applies the next time the page loads.
The mixer itself has a second row of behaviour switches under the crossfader. Fader curve shapes the channel faders (Linear as always, Sharp rises fast for scratch work, Smooth is an S-curve). EQ crossovers move all four channels' EQ corners together (ESC standard, DJM style, Rotary style), and Isolator EQ turns the channel EQs into true isolators: the cut side sweeps a band down to nothing and boosts cap at +6 dB. Hamster reverses the crossfader, X-fader off parks it at full volume on both sides for external-mixer work, and Fader start begins a deck when you lift its fader from the bottom. Each channel strip also carries a Pan knob, a numeric peak readout under its meter, and a staging line that names the trim the loaded track needs to sit at -14 LUFS. The master strip adds a meter bridge (big stereo bars with held peaks and a clip counter - click it to clear; PFL meter makes it follow the cued channel), a Mute that silences the speakers while recording carries on, a limiter bypass for purists (the bridge warns you when the master then clips), and a Main out switch for the main output device. In the headphones row, Cue mix blends the master into your phones alongside the cue bus and Split cue puts cue in the left ear and master in the right; the Booth row sends a second master feed, at its own level, to a monitor output. Auto talk-over ducks the mix by itself while you speak into a live mic.
The Master sound row is the output workshop: a glue compressor that gently sticks the mix together, a 3-band master EQ for room correction (it shapes the speakers only, never the recording), stereo width with a Mono check for club rigs, talk-over (hold to duck the mix 12 dB), a microphone input with its own level and mute, and the jog sensitivity. Imports are checked too: clipped files are named in the status line, MP3s hiding in lossless files get a badge, and leading silence over half a second is skipped on load with a TRIM marker on the waveform. WAV recordings are dithered at 16-bit, with a 24-bit option in the format menu. The whole console state is saved and restored with the session.
14. Analysis and the beatgrid
Tracks are analyzed in a background worker when they are added, so big imports never freeze the page; the library header shows the queue while it works. Each track gets a beat grid, a key with a confidence percentage, an energy level from 1 to 10, phrase sections, likely vocal sections (tinted on the zoom strip), and intro and outro shading on the waveform edges. A coloured dot beside the BPM rates the grid: green is confident, amber is worth a listen, red means check it. A VAR badge means the tempo itself wanders - the grid is the best single fit, so expect to ride the pitch. When a file carries an embedded BPM tag that agrees with detection, the tag wins and a TAG badge shows.
Prep tools live in the library rows: Re-analyze runs a second, different analysis pass on a track whose grid feels wrong; the lock button protects a finished grid and its cues from edits; Grid exports a small JSON of the grid, key and cues to move prep between machines, and Import grid JSON in the library header brings one back (matched by title). Click a key in the library to override it from the key picker, and switch the whole app between Camelot and Open Key notation in the library header. Sort by Similar to line up tracks that fit the deck A track's key family and tempo. Per-track trim is remembered: set a deck's Trim while a track is loaded and it comes back with that track. The centre of the mixer scores how mixable the two loaded tracks are, and warns when a grid disagrees with its stated BPM. On the decks, the lane head counts bars and beats (Bar 33.2), counts the last 32 bars down in big numbers, and flashes the deck tag on each downbeat. The BPM fold selector on the grid row shows a track at half or double BPM on the readouts only - the grid itself never changes.
15. Loops and cues in depth
Each track holds four loop slots under the loop row: click an empty slot to save the current loop there, click a saved slot to engage it, right-click clears it, and the name field beside the slots names the selected loop. Loop move shifts the active loop by its own length; Emergency loop drops a 4-bar loop at the playhead instantly; Exit at end leaves the loop when it next wraps instead of right away; the loop readout shows bars and seconds together. Traveller re-engages a saved loop whenever the playhead runs into it, and Default loop arms the track's saved loop every time it loads. Copy loop to next phrase duplicates the loop's settings onto the matching phrase later in the track.
Hot cues carry a colour and a mode. New cues take a colour from what they sit on - drops green, vocals purple, breaks blue - and Shift+click on a set pad cycles its colour by hand. Right-click on a set pad cycles its playback mode: normal, gate (plays only while you hold the pad), or loop (engages the saved loop that starts there). Shift+right-click clears the cue. With Cue at bar on in the master strip, cue jumps land on the next bar boundary. The quantize selector per deck chooses beat, bar or off for new points. The jog dial counts down in bars to the next hot cue, and the lane head counts down to the next memory cue.
Prep tools: Cue at first beat sets hot cue A on the grid's first beat; Prep all tracks in the library header applies a first-beat cue and an intro memory cue to every stored track; Copy points from other deck clones the other deck track's cues, loops and memory cues onto this track (for remixes of the same song); the Cue stack lists every point on the loaded track in time order; Delete all points wipes a track's points after a confirm (Ctrl+Z brings them back). Memory cues take a type (Intro, Drop, Break, Outro) and a colour from the small controls on each row, and Preview plays a point on a paused deck with its phones cue on. Slicer mode chops the bar under the playhead into 8 slices on the pads; Mash A/B bar in the sampler turns the sampler pads into slices of a deck's current bar.
16. The guided tour and the upgraded interface
The Guided tour button in the master strip walks a first mix step by step - load the demo tracks, play, set a cue, blend - highlighting each control as it goes; it remembers when you have finished it. Play and Cue are the biggest buttons on each deck, knob positions read as coloured arcs, and the library search understands combinations like "124 8A" (tempo and key together). Effect buttons describe themselves in plain words under each FX unit. Everything animates gently instead of snapping, gold is reserved for focus, the on-air deck and confirmations, and spacing follows one 8-pixel grid. The keyboard map (the ? button) prints cleanly from its Print button. Big mode now carries a set timer and the two on-air titles in giant type.
17. Effects in depth
Each FX unit now runs two effects. FX1 is the main effect; FX2 is a second one underneath it. In parallel (the default) both hear the deck; tick Series and FX2 hears FX1's output instead, and the Order button chooses which one feeds the other. The Param knob shapes the main effect: echo and dub feedback, reverb size, flanger depth, crush bits, phaser speed, noise resonance, wash openness, sweep resonance. Beat fractions run from 1/16 to 4 beats. Post-fader moves the effect return behind the channel fader, so echo and reverb tails ring on after you close the fader. Freeze echo loops the current tail with its input cut; Freeze reverb sustains the tail the same way. Ping-pong sends echo repeats alternating left and right, and the flanger's LFO can be a sine or a triangle.
Four effects are new. Sweep is a resonant filter sweep on one control. Lofi is bit-crush with the top end rolled off. Stutter chops and repeats the last beat fraction. Swell is a reverse-style reverb that blooms instead of striking. Duck is a sidechain pump: the other deck's level pushes this deck down on the beat (A and B pump each other; C and D likewise). Isolator gives you three kill buttons - Low, Mid, High - that cut a band completely while it is active. Wash out is a one-click transition: over four bars it brings in a wash and echo while the filter sweeps down; click it again to come back. Save preset stores a whole unit setup (both effects, levels, beats, params, series and post-fader) under a name, in this browser.
The Assign menu at the top of each unit points it somewhere else: any deck, the master, or the sampler, which has its own effects now. Gate, tremolo, stutter, duck and the isolator are deck-only (they work on the deck's own signal), so a unit assigned to the master or sampler will say so if you pick one. The master unit carries the full send-effect set too, and master tails survive track changes because the master effects live on the mix bus, not on a deck. FX tap sets a tempo for the beat effects when no deck is playing one; FX auto-level keeps a full-wet echo from doubling the volume. The crossfader can ride an effect level: set X-fader rides to a deck and fading away from that deck washes it out. And each deck's Jog release menu can fire the brake or a backspin when you let go of the jog wheel.
18. Arranging the console
The page is arranged performance-first: the deck lanes and the centre console sit at the top, and the setup sections live below them. Every section below the console folds away from its own header - click the header (chevron, title and an Open or Close word, the same header the Library dock uses) to fold or unfold it. The Master strip folds as a whole, and inside it the Mix room, Audio setup and Master sound groups each fold on their own; Audio setup keeps the buffer, latency, limiter and dropout readouts behind one button because they are set once a session. Each FX unit and stem unit folds from the small toggle in its corner, and a folded FX unit still shows which effect is loaded. The sampler starts folded - its Gain control stays in its header - and the library stays a slim tab at the bottom until you open it.
Three tools in the master strip arrange everything at once. Performance view opens the performance sections (FX units and master sound) and closes the setup ones. Reset layout restores the default arrangement. The Layout menu saves the current arrangement - which sections are open, their order and the density - under a name and recalls it in one click. Drag the grip on a section header to reorder the Master strip, the FX row and the sampler; the order is saved with the layout. The FX1 and FX2 units live inside their decks, under the waveform and above the hot cues, and fold from their own headers there. The Density menu switches the whole app between Comfortable and Compact spacing. And the C key folds every setup section away at once, leaving just the decks and the mixer while you play.
19. MIDI link
The MIDI link keeps ESC DJ and other gear on one clock. Open the MIDI panel (the MIDI button in the Record row of the master strip) and tick MIDI link. With a clock input picked - or left on Any - ESC DJ reads the incoming tempo (24 clocks per beat) and eases the playing decks toward it; the pitch sliders move with it, and the panel shows the clock tempo it hears. With a clock output picked, ESC DJ broadcasts clock at the mix tempo; switching the link on sends Start to that output and switching it off sends Stop. The link settings are remembered between visits.
20. If something sounds wrong
Distortion when an effect comes on: the wet return is auto-levelled, but a long reverb or a wash at full Level can still push the master - ease the FX Level back. The meter bridge in the master strip counts clips; click it to clear the counter, and if the limiter is bypassed it will warn you when the master clips.
Backspin does nothing: it needs a track loaded on that deck. It works whether the deck is playing or paused.
The MIDI panel says access was refused: the browser blocked MIDI. Allow it in the site permissions (the tune icon in Chrome's address bar) and reload. Some browsers do not offer Web MIDI at all - Chrome and Edge do.
No sound: check the output device in the Headphones row, the master Mute (it silences the speakers only - a recording keeps capturing), and that the channel's fader and PFL are where you expect.
The page warns it is struggling: that is a frame-time warning, not an audio fault. Close heavy tabs, or fold away the sections you are not using - the C key folds every setup section at once.
No chapter matches that search.